php, xml, biraz da sohoutcast server

ilhami nisvan · 09.06.2003

yav, nsm'nin yeni versiyonunda nev-i şahsına münhasır Radyo'da çalan şarkıları shoutcast server'ının ürettiği XML'den çeken bir script kullandım. nsm'yi geliştirdiğim bilgisayara PHP'nin 4.3.x'li bir versiyonu kurulu. Servere attığımda demin bahsettiğim script yüzünden site açılamıyor. server'da PHP 4.0 ya da 4.1 kurulu. Phpinfosundan baktım XML parser'i da kurulu.
Diyorum ki, bu kullandığım scriptte serverda versiyonda çalışmayan fonksiyonlar mı vardır acep.

XML'i şeeden PHP şudur:

<?
///////////////////////////////////////////////////////////////////////////////////////////////
// Just a little bit about this script.
// Part 1 Written by: T. Stanley
// Part 2 add-ons Written by: ST. JOHN
// Connection stuff from Jay Krivanek's and Oddsock's SHOUTout script.
// First feel free to edit it to suit your needs.
// This script does all that T. Peppers does (however it is probably a bit slower
// but it works w/o the XML stuff just pure PHP) and also retrieves the bitrate
// (if stream is up) and whether there is a source (DSP connected with DNAS).
// It relies heavily on the assumption that 7.HTML, index.HTML and XML page will not change.
// Currently works with DNAS 1.8.0 (haven't tested older versions).
// If you upgrade the DNAS and it breaks it is due to the fact that Nullsoft has changed
// the data on 7.HTML, index.HTML and XML page and the ereg_replace and explode will need
// to be tweaked.
// Right now it is setup to print out every variable it gets.
// Song data (titles and playedats)is recursive so it can get up to 20 (if set in DNAS) as
// well a unlimited listener info (IP, etc.)
// It is suggested that any variables you don't need you comment out or delete the extraction
// of the data.
// Arrays (song, playedats, etc.) start with 0. (i.e. song[0] = currently playing song)
// Thanks to Ari for the explanation of 7.HTML on the SHOUTcast listserv (I was lurking)
// Run the srcipt as is (after changing host, port, password) for a list of variables printed
// out (listnener data and song history will not show up unless there is data for them).
// Contacts:
// tom@shoutclub.com
// dstjohn@mediacast1.com
// Notes:
// Very Important >> Uncomment(take away the forward slashes //)
// all the echo statements to get a full list of all the variables,
// if you dont know what im talking about, then stop right here and go learn PHP
// http://www.php.net
// http://www.thickbook.com << very resourcefull for beginners
///////////////////////////////////////////////////////////////////////////////////////////////
include ("config.PHP");
$listenlink = 'http://'.$host.':'.$port.'/listen.pls'; //make link to stream
$fp = fsockopen("$host", $port, &$errno, &$errstr, 30); //open connection
if(!$fp) {
$success=2; //set if no connection
}
if($success!=2){ //if connection
fputs($fp,"GET /7.HTML HTTP/1.0\r\nUser-Agent: XML Getter (Mozilla Compatible)\r\n\r\n"); //get 7.HTML
while(!feof($fp)) {
$page .= fgets($fp, 1000);
}
fclose($fp); //close connection
$page = ereg_replace(".*<body>", "", $page); //extract data
$page = ereg_replace("</body>.*", ",", $page); //extract data
$numbers = explode(",",$page); //extract data
$currentlisteners=$numbers[0]; //set variable
$connected=$numbers[1]; //set variable

if($connected==1) //if DSP is connected
$wordconnected="yes"; //set variable
else //if no DSP connection
$wordconnected="no"; //set variable
$peaklisteners=$numbers[2]; //set variable
$maxlisteners=$numbers[3]; //set variable
$reportedlisteners=$numbers[4]; //set variable

##Stuff printing out to screen may want to shut off.##
// echo('$listenlink = '.$listenlink.' ');
// echo('$reportedlisteners = '.$reportedlisteners.' ');
// echo('$maxlisteners = '.$maxlisteners.' ');
// echo('$peaklisteners = '.$peaklisteners.' ');
// echo('$connected = '.$connected.' ');
// echo('$wordconnection = '.$wordconnected.' ');
// echo('$currentlisteners = '.$currentlisteners.' ');
##Okay stop commenting stuff out now.##
}

if($connected==1){ //only do if DSP is connected
$fp = fsockopen("$host", $port, &$errno, &$errstr, 30); //open connection
if(!$fp) { //if no connection
$success1=2; //dummy variable to see if successful connect
}
if($success1!=2){ //only do if connected
fputs($fp,"GET /index.HTML HTTP/1.0\r\nUser-Agent: XML Getter (Mozilla Compatible)\r\n\r\n"); //get index.HTML
while(!feof($fp)) {
$page .= fgets($fp, 1000);
}
$pageed = ereg_replace(".*Stream is up at ", "", $page); //extract data
$bitrate = ereg_replace(" kbps.*", "", $pageed); //extract data
fclose($fp); //close connection

##Print out bitrate.##
//echo('$bitrate = '.$bitrate.' ');
##You know the drill stop here.##

}
}

$fp = fsockopen("$host", $port, &$errno, &$errstr, 30); //open connection yet again
if(!$fp) { //if connection
$success2=2;
}
if($success2!=2){ //if connected
fputs($fp,"GET /admin.cgi?pass=$password&mode=viewxml HTTP/1.0\r\nUser-Agent: XML Getter (Mozilla Compatible)\r\n\r\n"); //get XML page
while(!feof($fp)) {
$page .= fgets($fp, 1000);
}

$loop = array("AVERAGETIME", "SERVERGENRE", "SERVERURL", "SERVERTITLE", "SONGTITLE", "SONGURL", "IRC", "ICQ", "AIM", "WEBHITS", "STREAMHITS", "INDEX", "LISTEN", "PALM7",
"LOGIN", "LOGINFAIL", "PLAYED", "COOKIE", "ADMIN", "UPDINFO", "KICKSRC", "KICKDST", "UNBANDST", "BANDST", "VIEWBAN", "UNRIPDST", "VIEWRIP", "VIEWXML",
"VIEWLOG", "INVALID"); //define all the variables to get (delte any ones you don't want)
$y=0; //dummy variable for while loop
while($loop[$y]!=''){ //while there are things in loop
$pageed = ereg_replace(".*<$loop[$y]>", "", $page); // extract data
$phpname = strtolower($loop[$y]); //make names in loop lowercase for variable names
$$phpname = ereg_replace("</$loop[$y]>.*", "", $pageed); //finish extracting data
if($loop[$y]==SERVERGENRE || $loop[$y]==SERVERTITLE || $loop[$y]==SONGTITLE) //if for code clean-up (if you have problems with variables with URL encoding (i.e. %20 for space put them in this loop)
$$phpname = urldecode($$phpname); // replace URL code with regular text (i.e. %20 = space)

##More stuff that prints##
//echo ('$'.$phpname.' = '.$$phpname.' ');
##Stop here. Your server will be upset if you comment out the next line of code ($y++;).##

$y++; //update dummy variable for while loop
}
$pageed = ereg_replace(".*<SONGHISTORY>", "", $page); //extract data
$pageed = ereg_replace("<SONGHISTORY>.*", "", $pageed); //extract data
$songatime = explode("<SONG>", $pageed); //break data down for each song
$r=1; //dummy variable
while($songatime[$r]!=""){ //while loop for each song
$t=$r-1; //correction for first value in array from explode is worthless
$playedat[$t] = ereg_replace(".*<PLAYEDAT>", "", $songatime[$r]); // extract data
$playedat[$t] = ereg_replace("</PLAYEDAT>.*", "", $playedat[$t]); //extract data
$song[$t] = ereg_replace(".*<TITLE>", "", $songatime[$r]); //extract data
$song[$t] = ereg_replace("</TITLE>.*", "", $song[$t]); //extract data
$song[$t] = urldecode($song[$t]); //cleans-up the URL code thing again

##Yet even more crap that gets printed out.##
//echo ('$song['.$t.'] = '.$song[$t].' $playedat['.$t.'] = '.$playedat[$t].' ');
##Same as last time. Unhappy servers tend to hurt people.##

$r++; //update loop variable
}
$pageed = ereg_replace(".*<LISTENERS>", "", $page); //extract data
$pageed = ereg_replace("</LISTENERS>.*", "", $pageed); //extract data
$listeninfo = explode("<LISTENER>", $pageed); //break apart data
$r=1; //dummy loop variable
while($listeninfo[$r]!=""){ //while loop for extraction
$t=$r-1; //correction for first value in array from explode is worthless
$hostname[$t] = ereg_replace(".*<HOSTNAME>", "", $listeninfo[$r]); //extract data
$hostname[$t] = ereg_replace("</HOSTNAME>.*", "", $hostname[$t]); //extract data
$useragent[$t] = ereg_replace(".*<USERAGENT>", "", $listeninfo[$r]); //extract data
$useragent[$t] = ereg_replace("</USERAGENT>.*", "", $useragent[$t]); //extract data
$underruns[$t] = ereg_replace(".*<UNDERRUNS>", "", $listeninfo[$r]); //extract data
$underruns[$t] = ereg_replace("</UNDERRUNS>.*", "", $underruns[$t]); //extract data
$connecttime[$t] = ereg_replace(".*<CONNECTTIME>", "", $listeninfo[$r]); //extract data
$connecttime[$t] = ereg_replace("</CONNECTTIME>.*", "", $connecttime[$t]); //extract data

##Yet even more crap that gets printed out.##
// echo ('$hostname['.$t.'] = '.$hostname[$t].' $useragent['.$t.'] = '.$useragent[$t].' $underruns['.$t.'] = '.$underruns[$t].' $connecttime['.$t.'] = '.$connecttime[$t].' ');
##STOP. Just think that was the last set of echos you have to comment out.##

$r++; //update loop variable
}
fclose($fp); //close connection
}
$password=changeme //Leave this. It writes over real value so if someone were to use
//include to get this page they cannot use echo $password to get your
//password. There is probably a better way to do this but I can't code.
?>

Eğer versiyonla ilgili bir sorunsa, kodu ne şekilde değiştirirsem eski PHPlerde de çalışır. Çünkü serverdaki PHP'yi update ettiremiyorum. Bir yardım...

stNonStop · 10.06.2003

görünüşte PHP 4 ile uyumsuz bir kod yok ama verdiği hatayıda yazsaydın belki daha çok yardımcı olabilirdik.

ilhami nisvan · 10.06.2003

hata vermiyor ki, bu scripti sayfalarıma include ettiğimde, sayfam bir türlü generate edilemiyor. 30 sn. sonra da timeout veriyor. Ne zaman ki include'ı kaldırıyorum. Sayfalar çalışıyor.

biturbo · 12.06.2003

4.0 veya 4.1 baya eski kalıo şu anda aslında
kurmamalarında ısrar etmeleri büyük ihtimal kullandıkları hazır kontrol panel sisteminde uyumsuzluk çıkmasın diedir...

başka ücretsiz bi yerde dene bence

09.06.2003	#1 (permalink)
ilhami nisvan Üyelik Tarihi: 24.01.2003 Yer: istanbul Yaş: 32 Mesaj: 15	php, xml, biraz da shoutcast server yav, nsm'nin yeni versiyonunda nev-i şahsına münhasır Radyo'da çalan şarkıları shoutcast server'ının ürettiği XML'den çeken bir script kullandım. nsm'yi geliştirdiğim bilgisayara PHP'nin 4.3.x'li bir versiyonu kurulu. Servere attığımda demin bahsettiğim script yüzünden site açılamıyor. server'da PHP 4.0 ya da 4.1 kurulu. Phpinfosundan baktım XML parser'i da kurulu. Diyorum ki, bu kullandığım scriptte serverda versiyonda çalışmayan fonksiyonlar mı vardır acep. XML'i şeeden PHP şudur: <? /////////////////////////////////////////////////////////////////////////////////////////////// // Just a little bit about this script. // Part 1 Written by: T. Stanley // Part 2 add-ons Written by: ST. JOHN // Connection stuff from Jay Krivanek's and Oddsock's SHOUTout script. // First feel free to edit it to suit your needs. // This script does all that T. Peppers does (however it is probably a bit slower // but it works w/o the XML stuff just pure PHP) and also retrieves the bitrate // (if stream is up) and whether there is a source (DSP connected with DNAS). // It relies heavily on the assumption that 7.HTML, index.HTML and XML page will not change. // Currently works with DNAS 1.8.0 (haven't tested older versions). // If you upgrade the DNAS and it breaks it is due to the fact that Nullsoft has changed // the data on 7.HTML, index.HTML and XML page and the ereg_replace and explode will need // to be tweaked. // Right now it is setup to print out every variable it gets. // Song data (titles and playedats)is recursive so it can get up to 20 (if set in DNAS) as // well a unlimited listener info (IP, etc.) // It is suggested that any variables you don't need you comment out or delete the extraction // of the data. // Arrays (song, playedats, etc.) start with 0. (i.e. song[0] = currently playing song) // Thanks to Ari for the explanation of 7.HTML on the SHOUTcast listserv (I was lurking) // Run the srcipt as is (after changing host, port, password) for a list of variables printed // out (listnener data and song history will not show up unless there is data for them). // Contacts: // tom@shoutclub.com // dstjohn@mediacast1.com // Notes: // Very Important >> Uncomment(take away the forward slashes //) // all the echo statements to get a full list of all the variables, // if you dont know what im talking about, then stop right here and go learn PHP // http://www.php.net // http://www.thickbook.com << very resourcefull for beginners /////////////////////////////////////////////////////////////////////////////////////////////// include ("config.PHP"); $listenlink = 'http://'.$host.':'.$port.'/listen.pls'; //make link to stream $fp = fsockopen("$host", $port, &$errno, &$errstr, 30); //open connection if(!$fp) { $success=2; //set if no connection } if($success!=2){ //if connection fputs($fp,"GET /7.HTML HTTP/1.0\r\nUser-Agent: XML Getter (Mozilla Compatible)\r\n\r\n"); //get 7.HTML while(!feof($fp)) { $page .= fgets($fp, 1000); } fclose($fp); //close connection $page = ereg_replace(".<body>", "", $page); //extract data $page = ereg_replace("</body>.", ",", $page); //extract data $numbers = explode(",",$page); //extract data $currentlisteners=$numbers[0]; //set variable $connected=$numbers[1]; //set variable if($connected==1) //if DSP is connected $wordconnected="yes"; //set variable else //if no DSP connection $wordconnected="no"; //set variable $peaklisteners=$numbers[2]; //set variable $maxlisteners=$numbers[3]; //set variable $reportedlisteners=$numbers[4]; //set variable ##Stuff printing out to screen may want to shut off.## // echo('$listenlink = '.$listenlink.'<BR>'); // echo('$reportedlisteners = '.$reportedlisteners.'<BR>'); // echo('$maxlisteners = '.$maxlisteners.'<BR>'); // echo('$peaklisteners = '.$peaklisteners.'<BR>'); // echo('$connected = '.$connected.' <BR>'); // echo('$wordconnection = '.$wordconnected.'<BR>'); // echo('$currentlisteners = '.$currentlisteners.'<BR>'); ##Okay stop commenting stuff out now.## } if($connected==1){ //only do if DSP is connected $fp = fsockopen("$host", $port, &$errno, &$errstr, 30); //open connection if(!$fp) { //if no connection $success1=2; //dummy variable to see if successful connect } if($success1!=2){ //only do if connected fputs($fp,"GET /index.HTML HTTP/1.0\r\nUser-Agent: XML Getter (Mozilla Compatible)\r\n\r\n"); //get index.HTML while(!feof($fp)) { $page .= fgets($fp, 1000); } $pageed = ereg_replace(".Stream is up at ", "", $page); //extract data $bitrate = ereg_replace(" kbps.", "", $pageed); //extract data fclose($fp); //close connection ##Print out bitrate.## //echo('$bitrate = '.$bitrate.' <BR>'); ##You know the drill stop here.## } } $fp = fsockopen("$host", $port, &$errno, &$errstr, 30); //open connection yet again if(!$fp) { //if connection $success2=2; } if($success2!=2){ //if connected fputs($fp,"GET /admin.cgi?pass=$password&mode=viewxml HTTP/1.0\r\nUser-Agent: XML Getter (Mozilla Compatible)\r\n\r\n"); //get XML page while(!feof($fp)) { $page .= fgets($fp, 1000); } $loop = array("AVERAGETIME", "SERVERGENRE", "SERVERURL", "SERVERTITLE", "SONGTITLE", "SONGURL", "IRC", "ICQ", "AIM", "WEBHITS", "STREAMHITS", "INDEX", "LISTEN", "PALM7", "LOGIN", "LOGINFAIL", "PLAYED", "COOKIE", "ADMIN", "UPDINFO", "KICKSRC", "KICKDST", "UNBANDST", "BANDST", "VIEWBAN", "UNRIPDST", "VIEWRIP", "VIEWXML", "VIEWLOG", "INVALID"); //define all the variables to get (delte any ones you don't want) $y=0; //dummy variable for while loop while($loop[$y]!=''){ //while there are things in loop $pageed = ereg_replace(".<$loop[$y]>", "", $page); // extract data $phpname = strtolower($loop[$y]); //make names in loop lowercase for variable names $$phpname = ereg_replace("</$loop[$y]>.", "", $pageed); //finish extracting data if($loop[$y]==SERVERGENRE \|\| $loop[$y]==SERVERTITLE \|\| $loop[$y]==SONGTITLE) //if for code clean-up (if you have problems with variables with URL encoding (i.e. %20 for space put them in this loop) $$phpname = urldecode($$phpname); // replace URL code with regular text (i.e. %20 = space) ##More stuff that prints## //echo ('$'.$phpname.' = '.$$phpname.' <BR>'); ##Stop here. Your server will be upset if you comment out the next line of code ($y++;).## $y++; //update dummy variable for while loop } $pageed = ereg_replace(".<SONGHISTORY>", "", $page); //extract data $pageed = ereg_replace("<SONGHISTORY>.", "", $pageed); //extract data $songatime = explode("<SONG>", $pageed); //break data down for each song $r=1; //dummy variable while($songatime[$r]!=""){ //while loop for each song $t=$r-1; //correction for first value in array from explode is worthless $playedat[$t] = ereg_replace(".<PLAYEDAT>", "", $songatime[$r]); // extract data $playedat[$t] = ereg_replace("</PLAYEDAT>.", "", $playedat[$t]); //extract data $song[$t] = ereg_replace(".<TITLE>", "", $songatime[$r]); //extract data $song[$t] = ereg_replace("</TITLE>.", "", $song[$t]); //extract data $song[$t] = urldecode($song[$t]); //cleans-up the URL code thing again ##Yet even more crap that gets printed out.## //echo ('$song['.$t.'] = '.$song[$t].' <BR>$playedat['.$t.'] = '.$playedat[$t].' <BR>'); ##Same as last time. Unhappy servers tend to hurt people.## $r++; //update loop variable } $pageed = ereg_replace(".<LISTENERS>", "", $page); //extract data $pageed = ereg_replace("</LISTENERS>.", "", $pageed); //extract data $listeninfo = explode("<LISTENER>", $pageed); //break apart data $r=1; //dummy loop variable while($listeninfo[$r]!=""){ //while loop for extraction $t=$r-1; //correction for first value in array from explode is worthless $hostname[$t] = ereg_replace(".<HOSTNAME>", "", $listeninfo[$r]); //extract data $hostname[$t] = ereg_replace("</HOSTNAME>.", "", $hostname[$t]); //extract data $useragent[$t] = ereg_replace(".<USERAGENT>", "", $listeninfo[$r]); //extract data $useragent[$t] = ereg_replace("</USERAGENT>.", "", $useragent[$t]); //extract data $underruns[$t] = ereg_replace(".<UNDERRUNS>", "", $listeninfo[$r]); //extract data $underruns[$t] = ereg_replace("</UNDERRUNS>.", "", $underruns[$t]); //extract data $connecttime[$t] = ereg_replace(".<CONNECTTIME>", "", $listeninfo[$r]); //extract data $connecttime[$t] = ereg_replace("</CONNECTTIME>.", "", $connecttime[$t]); //extract data ##Yet even more crap that gets printed out.## // echo ('$hostname['.$t.'] = '.$hostname[$t].' <BR>$useragent['.$t.'] = '.$useragent[$t].' <BR>$underruns['.$t.'] = '.$underruns[$t].' <BR>$connecttime['.$t.'] = '.$connecttime[$t].'<BR>'); ##STOP. Just think that was the last set of echos you have to comment out.## $r++; //update loop variable } fclose($fp); //close connection } $password=changeme //Leave this. It writes over real value so if someone were to use //include to get this page they cannot use echo $password to get your //password. There is probably a better way to do this but I can't code. ?> Eğer versiyonla ilgili bir sorunsa, kodu ne şekilde değiştirirsem eski PHPlerde de çalışır. Çünkü serverdaki PHP'yi update ettiremiyorum. Bir yardım... __________________ ilhami nisvan {şahs-ül zuhûrat} Mesaj ilhami nisvan tarafından 10.06.2003 (00:15) yeniden düzenlendi.

10.06.2003	#2 (permalink)
stNonStop Üyelik Tarihi: 16.02.2002 Yer: İstanbul Yaş: 29 Mesaj: 1,809 Görsel: 5	görünüşte PHP 4 ile uyumsuz bir kod yok ama verdiği hatayıda yazsaydın belki daha çok yardımcı olabilirdik. __________________ St. Nonstop Elektronik ve Haberleşme Mühendisi Aziz DURMAZ

10.06.2003	#3 (permalink)
ilhami nisvan Üyelik Tarihi: 24.01.2003 Yer: istanbul Yaş: 32 Mesaj: 15	hatayı da keşke verebilsem hata vermiyor ki, bu scripti sayfalarıma include ettiğimde, sayfam bir türlü generate edilemiyor. 30 sn. sonra da timeout veriyor. Ne zaman ki include'ı kaldırıyorum. Sayfalar çalışıyor. __________________ ilhami nisvan {şahs-ül zuhûrat}

12.06.2003	#4 (permalink)
biturbo Üyelik Tarihi: 20.03.2003 Yer: istanbul Mesaj: 94	4.0 veya 4.1 baya eski kalıo şu anda aslında kurmamalarında ısrar etmeleri büyük ihtimal kullandıkları hazır kontrol panel sisteminde uyumsuzluk çıkmasın diedir... başka ücretsiz bi yerde dene bence

Sponsorlu Bağlantılar
Zoque.Forum Reklam